Recording A Qso Audio - Icom ID-4100A Advanced Manual

Previous view
7
VOICE MEMORY

Recording a QSO audio

NOTE:
• Be sure to insert a microSD card into the
transceiver before recording the audio.
• Once the recording has started, it will continue,
even if the transceiver is restarted.
To starting to record
1. Push [QUICK].
2. Rotate [DIAL] to select "<<REC Start>>," then
push [ï].
Recording Standby mode
The recording starts when you transmit or the squelch
opens.
Displayed
Information
L
• The recording pauses while no signal is received, and
resumes when a signal is received again.
• The recording continues until you manually stop
recording, or the card becomes full.
• If the recording file's content reaches 2GB, the
transceiver automatically creates a new file, and
continues recording.
TIP: When the PTT Automatic Recording function is
set to ON, the recording automatically starts when
"<<REC Start>>" is selected. In that case, recording
continues even while no signal is received.
See page 7-4 for details.
( Voice Memo > QSO Recorder > Recorder Set >
PTT Auto REC)
Displayed
Blinks
To stop recording
1. Push [QUICK].
2. Rotate [DIAL] to select "<<REC Stop>>," then
push [ï].
7-2