Menu Items And Default Settings - Icom ID-4100A Advanced Manual

Previous view
9
MENU SCREEN
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Voice Memo
QSO Recorder
<<REC Start>>*
Play Files*
Recorder Set
REC Mode
RX REC Condition
File Split
PTT Auto REC
Player Set
Skip Time
DV Auto Reply*
Voice TX
Record*
TX Set
Repeat Time
TX Monitor
<<TX>>*
GPS
GPS Set
GPS Select
Manual Position
GPS Out (To DATA Jack)
* Be sure to insert the microSD card into the transceiver before selecting these items.
Set the TX/RX voice recording options.
Set QSO recorder options.
TX&RX or RX Only
Always or Squelch Auto
OFF or ON
OFF or ON
3sec, 5sec, 10sec, or 30sec
Set microphone voice recording options.
T1~T4
1sec~5sec~15sec
OFF or ON
T1~T4, Repeat TX
Set GPS options.
OFF, Internal GPS,
External GPS, or Manual
OFF or ON
9-4
Starts recording the received signal audio.
L While recording, <<REC Stop>> is displayed.
Plays the recorded audio.
Selects whether or not to record the TX audio.
Selects whether or not the squelch status
affects the RX voice audio recording.
Selects whether or not to automatically create
a new file if transmission and reception, or
squelch status (open and close) is changed.
Turns the PTT Automatic Recording function
ON or OFF.
Sets the Skip time to rewind or forward the
recorded audio when you push the fast-rewind
or fast-forward key during playback.
Records a voice audio to use the Auto Reply
function in the DV mode.
Starts recording the microphone audio.
Sets the repeat interval. The transceiver
repeatedly transmits the recorded voice audio
at this interval.
The TX Monitor function outputs the TX
voice audio from the speaker during voice
transmission.
The transceiver transmits the recorded voice
audio.
Selects either the internal or an external
GPS receiver that the transceiver receives its
position data from.
Manually enter your current position.
Turns the output of GPS information from the
internal GPS receiver to the [DATA] jack ON
or OFF.