Call Sign Items - Icom ID-4100A Advanced Manual

Previous view
9
MENU SCREEN

Call Sign items

Call Sign
Call Sign
Sets or views the "UR," "R1," "R2," and "MY" call signs
to use in the DV mode.
When not using the DR function, sets the call signs on
this screen.
For Simplex operation (DV mode)
You can set the "UR" and "MY" call signs.
For Duplex (repeater) operation
(DV mode/DR function)
You can set only "MY" call sign when the DR function
is ON.
<To manually set the Duplex (repeater) operation>
Example: Making a gateway CQ call to Hamacho
repeater (JP1YIU A) from the Hirano
repeater (JP3YHH A), in the DV mode.
L Before starting to set the call sign, set the
frequency of your access repeater and duplex
direction on the standby screen. (Section 4)
TIP: When the DR function is ON, the repeater call
sign is automatically set. (p. 9-49)
Step 1. Setting the call sign "R1"
1. Rotate [DIAL] to select "R1."
2. Push [QUICK]
3. Select "Edit," then push [ï].
4. Rotate [DIAL] to enter the first character.
L Selectable characters are Alphanumeric characters
and symbol ("/")
5. Push [MW] to move the cursor forwards, or push
[MODE] to move the cursor backwards.
6. Repeat steps 4 and 5 to enter the repeater call
sign of up to 8 characters, including a space.
7. After entering, push [ï].
(Example: JP3YHH A)
9-41
Step 2. Gateway "R2" setting
1. Select "R2," then push [ï].
L To manually enter the call sign, push [QUICK], then
select "Edit."
2. Select "GW," then push [ï].
About the RPT2 SELECT screen
NOT USED* For local area call
To select the gateway call sign from
GW
the repeater list.
Repeater To select the repeater that has the
name same gateway as the "R1" repeater.
Step 3. Destination "UR" setting
1. Select "UR," then push [ï].
L To manually enter the call sign, push [QUICK], then
select "Edit."
2. Select "Gateway CQ," then push [ï].
3. Select repeater group where your destination
repeater is listed, then push [ï].
4. Select the repeater, then push [ï].
About the YOUR SELECT screen
To select "CQCQCQ" to make a non-
CQCQCQ
call sign specific call.
To select "Gateway CQ" to make a
Gateway CQ*
call using the repeater list.
To select the destination "UR" call sign
Your Call Sign
using the Your Call Sign memory.
To select the destination "UR" call sign
RX History
using the RX History.
To select the destination "UR" call sign
TX History
using the TX History.
*Not displayed in the Simplex mode.
(Example: 11:Japan)
(Example: Hamacho)