Home Channel Function; D Home Channel Setting; D Home Channel Operation; D Home Ch Beep Function - Icom ID-4100A Advanced Manual

Previous view
10
OTHER FUNCTIONS

Home channel function

Home channels are often-used frequencies you can
preset in the transceiver's VFO mode, Memory mode
and DR function. Select the Home channel by just
pushing [HOME] in each mode.

D Home channel setting

1. Select a mode (VFO or Memory) or the DR screen
in which you want to set the Home channel.
2. Select a frequency to be set as the Home
channel.
L On the DR screen, select "FROM."
3. Push [QUICK].
4. Rotate [DIAL] to select "Home CH Set," then push
[ï].
5. Select an option, then push [ï].
L In the VFO mode, select "Set Frequency," in the
Memory mode, select "Set Channel." or on the DR
screen, select "Set Repeater."
TIP: Selecting "Clear" in step 4 clears the Home
channel setting.

D Home channel operation

1. Select a mode (VFO or Memory) or the DR
screen in which you want to select the Home
channel.
2. Push [HOME] on the microphone.
• Selects the Home channel of the selected mode or DR
screen.

D Home CH Beep function

When the specified Home CH is selected by rotating
[DIAL], a beep sounds.
You will know the Home CH selection without looking
at the display.
L You can turn OFF the Home CH Beep function on
the MENU screen.
(Sounds > Home CH Beep)
10-7