Icom ID-4100A Advanced Manual page 154

Previous view
9
MENU SCREEN
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Backlight Night Time Setting
Night Time Setting
Brightness
Night Time Start
Night Time End
Auto Dimmer Setting
Auto Dimmer
Auto Dimmer Timer
Auto Dimmer Cancel (PTT) OFF or ON
Auto Dimmer Cancel
(DV RX)
LCD Contrast
RX Call Sign
RX Position Indicator
RX Position Display
RX Position Display Timer
Reply Position Display
TX Call Sign
Scroll Speed
Opening Message
Voltage (Power ON)
* The default value may differ, depending on the transceiver version.
OFF or ON
1~2~4
0:00~18:00~23:59
0:00~6:00~23:59
OFF, Auto-OFF, or Auto 1~3
5sec, 10sec
OFF or ON
1~8~16
OFF, Normal, RX Hold, or Hold
OFF or ON
OFF or ON
5sec, 10sec, 15sec, 30sec, or
Hold
OFF or ON
OFF, Your Call Sign, or
My Call Sign
Slow or Fast
OFF or ON
OFF or ON
9-11
Selects whether or not to turn down the
backlight brightness for nighttime operation.
Selects the backlight brightness level for
nighttime operation.
Sets the start time for nighttime operation.
Sets the end time for nighttime operation.
Sets the Auto Dimmer function for nighttime
operation.
Sets the period of time until the backlight turns
OFF when "Auto Dimmer" is set to "Auto-OFF"
or "Auto-1" to "Auto-3."
Select the transceiver operation when [PTT] is
pushed when the Auto Dimmer is activated.
Select the transceiver operation when
receiving a DV signal while the Auto Dimmer
is activated.
Sets the contrast level of the LCD.
Selects the call sign and message display
option when receiving a call.
Selects whether or not to display the indicator
when the position data is included in the
signal received in the DV mode.
Selects whether or not to display the caller's
position data in a dialog when the data is
included in the signal received in the DV
mode.
Sets the RX position data display period of
time.
Selects whether or not to display the caller's
position data in a dialog when the data is
included in the Auto Reply signal.
Selects whether or not to display My or Your
call sign while transmitting.
Selects the scrolling speed of the message,
call sign, or other text.
Selects whether or not to display the opening
message at power ON.
Selects whether or not to display the power
source voltage at power ON.