Icom ID-4100A Advanced Manual page 83

Previous view
4
D-STAR OPERATION
Your setting is correct?
If you make a local area call with a gateway setting
still selected in "TO," the destination repeater will be
busy while you transmit.
So the stations that use that repeater as their Access
repeater cannot access it, as shown below.
BE SURE to set CQCQCQ in "TO" when you intend to
make a local call, or after you finish a Gateway call.
Example: JM1ZLK wants to make a Local area call.
Caller
(JM1ZLK)
JM1ZLK's setting
The destination ("TO") setting is incorrect.
Correct setting
To make a Local area call, set the
destination ("TO") to "CQCQCQ."
See page 4-9 for details.
Hamacho repeater
Hamacho area
Hirano repeater
Hirano area
NOTE: With this setting, the Local area call can be
made, but the destination repeater, selected in "TO,"
is also busy while you transmit.
So the station that uses the destination repeater as
their Access repeater cannot access it.
4-46
Called