Icom ID-4100A Advanced Manual page 206

Previous view
9
MENU SCREEN
Display items (Continued)
LCD Contrast
Display > LCD Contrast
Set the LCD contrast level to between 1 (lowest
contrast) and 16 (highest contrast).
RX Call Sign
Display > RX Call Sign
Select whether or not to display the call sign and the
message of the caller station, when a call is received.
• OFF: Does not display the caller station's call
sign and message.
• Normal: The caller station's call sign and message
scroll only once across the display.
• RX Hold: The caller station's call sign and message
scroll once, and then only the call sign is
displayed until the signal disappears.
• Hold: The caller station's call sign and message
scroll only once, and then only the call sign
is displayed until the signal disappears.
When the signal disappears, the call sign
and the message are alternately displayed,
each for 2 seconds.
L When this item is set to "Normal," "RX Hold" or
"Hold," and if you enter the caller station's call sign
and name in Your Call Sign screen, the entered
name is displayed with "( )" after the call sign.
RX Position Indicator
Display > RX Position Indicator
Select whether or not to display " " (RX position
indicator) when the signal received in the DV mode
contains position data.
• OFF : Displays no indicator even though the
received signal contains position data.
• ON : Displays the indicator when the received
signal contains position data.
L When the "RX Call Sign" is set to "OFF," the
indicator is not displayed when the received signal
contains position data, even if this item is set to
ON.
(Default: 8)
(Default: Normal)
(Default: ON)
9-63
RX Position Display
Display > RX Position Display
Select whether or not to display the caller's position
in a dialog when the signal received in the DV mode
contains a caller station's position.
• OFF: Does not display the caller's position.
• ON: Displays the caller's position.
L You can set the display period of time in the "RX
Position Display Timer" item.
RX Position Display Timer
Display > RX Position Display Timer
Set the display period of time for the caller's position.
• 5/10/15/30sec: Displays the caller's position for this
set period of time.
• Hold: Displays the caller's position until you operate
the transceiver.
Reply Position Display
Display > Reply Position Display
Select whether or not to display the caller's position in
a dialog when the Auto Reply signal contains a caller
station's position.
• OFF: Does not display the caller's position.
• ON: Displays the caller's position.
TX Call Sign
Display > TX Call Sign
Select whether or not to display your own or the
destination call sign while transmitting in the DV mode.
• OFF: Does not display any call sign.
• Your Call Sign: Displays and scrolls the destination's
call sign. When the destination's call
sign and name are entered in your
memory, the transceiver displays
the name after the call sign in any
DV mode except when using the DR
function.
• My Call Sign: Displays and scrolls your own call
sign.
Scroll Speed
Display > Scroll Speed
Set the scrolling speed of the message, call sign, or
other text, that is displayed on the screen.
• Slow: The scroll speed is slow.
• Fast: The scroll speed is fast.
(Default: ON)
(Default: 10sec)
(Default: ON)
(Default: Your Call Sign)
(Default: Fast)