Icom ID-4100A Advanced Manual page 232

Previous view
10
OTHER FUNCTIONS
Cloning function
D Transceiver-to-Transceiver cloning using a microSD card (Continued)
Step 3. Loading the setting data into the sub
transceiver.
SD Card > Load Setting
1. Push [MENU].
2. Rotate [DIAL] to select "SD Card," then push [ï].
3. Select "Load Setting," then push [ï].
4. Select a file to load.
• Displays the LOAD SETTING screen.
5. Select the loading option, then push [ï].
• ALL: Loads all memory channels, Menu screen
item settings and the repeater list into the
transceiver.
• Except My Station:
Loads all memory channels, Menu screen
item settings and the repeater list except
MY call signs and TX message into the
transceiver.
• Repeater List Only:
Loads only the repeater list into the
transceiver.
• The confirmation dialog "Keep 'SKIP' settings in the
Repeater List?" is displayed.
6. Select <YES>, <NO> or <Cancel>, then push [ï].
• YES: Retains the skip settings of the repeater
list. (p. 4-40)
• NO: Does not retain the skip settings of the
repeater list.
• Cancel: Returns to the LOAD FILE screen.
• When you select <YES> or <NO>, the confirmation
dialog "Load file?" is displayed.
7. Select <YES>, then push [ï].
• Starts the file check.
L While checking the file, displays "CHECKING FILE"
and a progress bar.
8. After checking, settings data loading begins.
L While loading, "LOADING" and a progress bar are
displayed.
9. After loading ends, "COMPLETED!" is displayed.
L To complete the loading, restart the transceiver.
10-16