Icom ID-4100A Advanced Manual page 158

Previous view
9
MENU SCREEN
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Others
Information
Voltage
Version
Clone
Clone Mode
Reset
Partial Reset
All Reset
Set other options.
9-15
Displays the power source voltage.
Displays the transceiver's firmware version
number.
Reads or writes the CS-4100 data from or to
the PC.
Returns all settings to their defaults, without
clearing the memory contents, call sign
memories or repeater lists.
Clears all entries and memories, and returns
all settings to their defaults.