Cloning Function - Icom ID-4100A Advanced Manual

Previous view
10
OTHER FUNCTIONS

Cloning function

The ID-4100A/E has a data cloning capability. This
function is useful when you want to copy all of the
entered contents from one ID-4100A/E to another.
Cloning can also be done with a PC.
Transceiver-to-Transceiver cloning using a
microSD card (p. 10-15)
Master
Cloning from a PC using a microSD card (p. 10-17,
CS-4100 Instruction manual)
To the memory
card slot
To the memory
card reader
L If your PC does not have a microSD card slot,
connect a memory card reader (user supplied) to
use the microSD card.
Sub
10-14
Cloning from a PC using an optional cloning cable
(CS-4100 Instruction manual)
By using the CS-4100
cloning software
optional cloning cable, cloning can be done with a PC.
See the CS-4100 instruction manual that can be
downloaded from the Icom website.
http://www.icom.co.jp/world/support/
To the
To the speaker jack
[DATA] jack
OPC-2350LU
(Option)
IMPORTANT: When using the OPC-2350LU, set
the "DV Data TX" setting of the transceiver to "PTT,"
before reading or writing setting data. Otherwise,
when a PC input data through the [DATA] jack, the
transceiver automatically transmits it.
(MENU > DV Set > DV Data TX)
and an
OPC-478UC To the
(Option) USB port
To the
USB port