Rainfall - Icom ID-4100A Advanced Manual

Previous view
9
MENU SCREEN
Display items (Continued)
Opening Message
Display > Opening Message
Select whether or not to display the opening message
at power ON.
• OFF: Opening message is not displayed.
• ON: Icom logo, MY call sign, the product model
("ID-4100A" or "ID-4100E")* are displayed.
*Depending on the version.
Voltage (Power ON)
Display > Voltage (Power ON)
Select whether or not to display the power source
voltage at power ON.
• OFF: Does not display the voltage of the external
DC power source at power ON.
• ON: Displays the voltage of the external DC power
source at power ON.
NOTE: When the voltage of the external DC power
source is over 17.0 V, "Over Voltage" is displayed.
In that case, immediately disconnect the DC power
source.
Latitude/Longitude
Display > Display Unit > Latitude/Longitude
Select either the ddd ºmm.mm' or ddd ºmm'ss'' format
to display the position.
Altitude/Distance
Display > Display Unit > Altitude/Distance
Select either the meter or feet/mile format to display
the distance and altitude.
Speed
Display > Display Unit > Speed
Select either the km/h, mph or knots format to display
the speed.
Temperature
Display > Display Unit > Temperature
Select either the degrees ºC or ºF format to display
the temperature.
* The default value may differ, depending on the transceiver
version.
(Default: ON)
(Default: ON)
(Default: ddd ºmm.mm')
(Default: feet/mile*)
(Default: mph*)
(Default: ºF*)
Barometric
Display > Display Unit > Barometric
Select between the hPa, mb, mmHg and inHg format
to display the barometric pressure.

Rainfall

Display > Display Unit > Rainfall
Select either the mm or inch format to display the
amount of rainfall.
Wind Speed
Display > Display Unit > Wind Speed
Select between the m/s, mph and knots format to
display the wind speed.
Display Language
Display > Display Language
Set the screen display language type in the DR screen
or MENU screen to English or Japanese.
L This item is displayed only when the "System
Language" is set to "Japanese." See page 9-65
"Choose your language carefully" about setting
cautions.
System Language
Display > System Language
Set the system language of the transceiver.
• English: The system language of the transceiver is
English.
Only alphabetical characters (A to Z, a to
z, 0 to 9) and symbols (! " # $ % & ' ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~) can be
displayed. If Japanese characters (Kanji,
Hiragana and Katakana) are included,
the display shows "=" or "_" instead of
that character. In that case, you can only
delete "=" or "_" in the transceiver's edit
mode.
• Japanese: The system language of the transceiver is
Japanese.
Kanji, Hiragana and Katakana characters,
and the 2-bytes symbols can be
displayed. To display such characters
in the DR screen or Menu mode, set
"Display Language" to "Japanese."
L When this item is set to "English," "Display
Language" is not displayed.
9-64
(Default: inHg*)
(Default: inch*)
(Default: mph*)
(Default: English)
(Default: English)