Table of Contents
Advertisement
Figure 38: Rail-location pegs from inside of the rail flange and the clip
nut
Legend
1 Rail location pegs from inside of the rail flange
5
Position the front of the rails inside of the rack.
Make sure the rail flange aligns with the inside of the rack flange and the
rail label faces the inside of the rack.
Square-hole racks
The rail-location pegs fit inside of the rack holes.
Round-hole rack
The special screws fit inside of the rack holes.
Threaded-hole rack
The rail-location pegs fit inside of the rack holes.
The following figure shows an example of the rail-location pegs inserted
into a square-hole rack.
Install Component Rails
2 Clip nut
72
Advertisement
Table of Contents
