System Status Verification - Oracle FS1-2 Installation Manual

12 Type
13 Type
The list of the drives installed on the Drive Enclosure is displayed in the
console. Verify that the drive is back online.
14 Clear the drive failure history.
After the command completes, the system returns a success message.

System Status Verification

The status of the installation of the Oracle FS System can be verified using the
Oracle Flash Storage Portal web interface or the Oracle FS System Manager (GUI)
or the FSCLI.
To verify system status on the Oracle Flash Storage Portal, use a web browser on
a computer, tablet, or mobile device that has access to the customer management
network. In the browser, enter the IP address of the Oracle FS System or, if the
system name is resolvable, enter the name of the system. To verify system status
on the Oracle FS System Manager (GUI), download and install the GUI client on
a client workstation with access to the Pilot. Alternatively, you can download and
install the
To verify the wiring topology using the
•
fscli topology -list —enclosure <output-text-filename1.txt>
For example:
list.txt>
•
fscli topology –download –topomap <output-text-
filename2.txt>
For example:
map.txt>
The
topology -list -enclosure
the list of Drive Enclosures with their world wide names (WWN) and chassis ID
values. The
containing the SAS connection map. Evaluate the output files to determine the
necessary corrections.
and click Send.
SCSI
and click Send.
CHK
a) Log in to the Oracle FS System Command Line Interface (fscli).
b) Issue the following command:
fscli enclosure -clearDriveHistory -enclosure
[enclosure-id-or-fqn] -driveSlot X
The
enclosure-id-or-fqn
unique identifier (ID) of the Drive Enclosure. The FQN includes the
chassis ID, which is displayed on the front of the Drive Enclosure.
Note: The
driveSlot
the Drv column from the results of the
on a workstation with access to the Pilot.
fscli
fscli topology -list —enclosure <sas-encl-
fscli topology –download –topomap <sas-conn-
topology -download -topomap
is the fully qualified name (FQN) or the
value is derived from the HEX value listed in
SCSI CHK
, use the following commands:
fscli
command generates an output file containing
command generates an output file
Complete the Installation
command.
187