Table of Contents
Advertisement
then the Drive Enclosure is not seated. You must reinsert the Drive
Enclosure.
Ensure that the Drive Enclosure slides smoothly into the rack and
•
out of the rack. If the Drive Enclosure does not slide smoothly in and
out of the rack, then the Drive Enclosure is not seated. You must
reinsert the Drive Enclosure.
Ensure that the screw hole at the back of the Drive Enclosure aligns
•
with the screw hole on the rail. Do not secure the screw, yet. If the
screw hole at the back of the Drive Enclosure does not align with the
screw hole on the rail, then the Drive Enclosure is not seated. You
must reinsert the Drive Enclosure.
5
On both sides of the Drive Enclosure, insert a Phillips Number 2 pan head
screw with patch lock through the hole at the back of the Drive Enclosure
and secure it into the screw hole on the rail.
Figure 53: Back of the Drive Enclosure and Rail secured
Legend
1 Phillips Number 2 pan head screw with
patch lock
Important: If you insert the screw through the hole at the back of the Drive
Enclosure and the screw does not align with the screw hole on the rail,
Install Components into the Rack
2 Back of the Drive Enclosure
85
Advertisement
Table of Contents
