Table of Contents
Advertisement
Chapter 3 Install Components
Related concepts
About Pillar Axiom 600 Hardware Specifications
•
Install a 1U PDU
1 Choose one of the following options:
2 Insert the PDU into the rack, as shown below.
There are no rails for a PDU.
About Power Distribution Unit Installation
● For square mounting holes, snap a 10-32 snap-in cage nut into the
bottom and 3rd hole of each vertical rail.
Figure 24 Snap-in cage nut
● For round mounting holes, clip one 10-32 clip-on cage nut into the
bottom and 3rd holes of each channel in the pair. (Pillar Axiom 600
systems are not shipped with clip-on cage nuts.)
62
Advertisement
Table of Contents
