Oracle FS1-2 Installation Manual page 186

Note: You can select any Drive Enclosure from the list. To ensure expedient
rebuild times, perform a drive failure test on the highest-tier Drive
Enclosure in the system.
5 From the I/O Module list, select 0 or 1, and click Next.
A large amount of data displays in the Drive Enclosure Console. To
confirm that the console commands succeed, copy and paste the
information into a text editor and review the information in the text editor.
6 From the View Drive Enclosure Console command field, type
click Send.
7 Type and click Send.
CHK
The console displays a list of the drives installed on the Drive Enclosure.
The following example shows a list of drives displayed in the console.
Note: If any of the drives are offline, select a different Drive Enclosure.
8 Type and click Send.
ATA
9 Type , where
FPOFF XX
the drives displayed in the console output.
10 Click Send.
The drive fails from both nodes. Use the GUI to confirm the status of the
drive.
11 To bring the drive back online, type
the Drv column for the drive displayed in the console, and click Send.
The drive returns online. Use the GUI to confirm the status of the drive.
is the number from the Drv column for one of
XX
FPON XX
Complete the Installation
SCSI
, where is the number from
XX
and
186