Oracle Fs System Configurations; Pilot Cabling; Table 23: Oracle Fs System Configurations; Figure 61: Pilot Port For External Cabling - Oracle FS1-2 Installation Manual

Related Links
Build Map for Your Oracle FS System
Pilot Management Interface Wiring Diagram
Controller Wiring Diagrams
Drive Enclosure Wiring Diagrams

Oracle FS System Configurations

An Oracle FS System can be configured as a base system or as a performance
system.
The following table summarizes the Oracle FS System configurations.

Table 23: Oracle FS System configurations

Configuration
Base
Base
Performance

Pilot Cabling

External cabling of the Pilot nodes connects the Oracle FS System to the customer
management network. Internal cabling provides the private management
interface (PMI) to support the internal private management protocol used for the
internal functioning of the system.
Pilot Port for External Cabling
The following figure shows the external Ethernet port.

Figure 61: Pilot port for external cabling

SAS HBAs
Factory configuration of one SAS
HBA for each Controller. The SAS
HBA is installed in PCIe slot 3.
Factory configuration of two SAS
HBAs for each Controller. The SAS
HBAs are installed in PCIe slot 3
and PCIe slot 6.
Factory configuration of three SAS
HBAs for each Controller. The SAS
HBAs are installed in PCIe slots 3, 6,
and 2.
Oracle FS Systems: Cabling Overview
Number of Drive
Enclosures
Maximum of 10 Drive
Enclosures assigned to one
or two strings.
Maximum of 20 Drive
Enclosures assigned to one
to four strings.
Maximum of 30 Drive
Enclosures assigned to one
to six strings.
96