Oracle FS1-2 Installation Manual page 147

of five Drive Enclosures in the first string. Refer to the wiring diagrams for
guidance when cabling Drive Enclosures.
1 Connect the straight end of the C13-to-C14 power cords to the power
cooling modules on each Drive Enclosure.
Note: The C14 ends of the C13-to-C14 power cords are angled to provide a
flush fit at the power distribution units (PDUs). Do not connect the power
cords to the PDUs at this time.
Note: Non-Oracle PDUs might require different power cords from those
included in the shipment. You can order alternate power cords from
Oracle.
2 Cable Drive Enclosure 1 to Drive Enclosure 2.
a) Connect the end of the cable labeled "DE-1 IOM0-1" to I/O module 0,
port 1 on Drive Enclosure 1.
b) Connect the other end of the cable, labeled "DE-2 IOM0-0," to I/O
module 0, port 0 on Drive Enclosure 2.
c) Connect the end of the cable labeled "DE-1 IOM1-0" to I/O module 1,
port 0 on Drive Enclosure 1.
d) Connect the other end of the cable, labeled "DE-2 IOM1-1," to I/O
module 1, port 1 on Drive Enclosure 2.
3 Cable Drive Enclosure 2 to Drive Enclosure 3.
a) Connect the end of the cable labeled "DE-2 IOM0-1" to I/O module 0,
port 1 on Drive Enclosure 2.
b) Connect the other end of the cable, labeled "DE-3 IOM0-0," to I/O
module 0, port 0 on Drive Enclosure 3.
c) Connect the end of the cable labeled "DE-2 IOM1-0" to I/O module 1,
port 0 on Drive Enclosure 2.
d) Connect the other end of the cable, labeled "DE-3 IOM1-1," to I/O
module 1, port 1 on Drive Enclosure 3.
4 Cable Drive Enclosure 1 to Drive Enclosure 4.
a) Connect the end of the cable labeled "DE-1 IOM0-2" to I/O module 0,
port 2 on Drive Enclosure 1.
b) Connect the other end of the cable, labeled "DE-4 IOM0-0," to I/O
module 0, port 0 on Drive Enclosure 4.
5 Cable Drive Enclosure 2 to Drive Enclosure 4.
a) Connect the end of the cable labeled "DE-2 IOM1-2" to I/O module 1,
port 2 on Drive Enclosure 2.
b) Connect the other end of the cable, labeled "DE-4 IOM1-0," to I/O
module 1, port 0 on Drive Enclosure 4.
6 Cable Drive Enclosure 2 to Drive Enclosure 5.
Connect the Internal Cables
147