Update The Drive Firmware - Oracle FS1-2 Installation Manual

Flash storage system (not racked)
Hide thumbs Also See for FS1-2:
Table of Contents

Advertisement

Shutdown Controller
Ignore Current Requests
Ignore compatibility
Ignore hardware status
Ignore system alerts
Ignore Compatibility
Override failed software update
5
Click OK.
6
Click Yes.
When prompted to confirm the software override options, continue to click
Yes until the upgrade starts.
7
After the upgrade completes, check that the software versions are correct
and that the system status is Normal.

Update the Drive Firmware

During the initial installation of an Oracle FS System, make sure the drive
firmware for all of the drives is current. Installing the updates of the drive
firmware is a separate process from the software updates.
Note: Updating the drive firmware is a disruptive process and requires restarting
the system.
Note: Use the primary administrator account to perform the update operation.
The default password is
1
Navigate to Support > Software and Firmware.
The summary page displays the software and firmware packages currently
installed on the Drive Enclosures, Drives, Pilots, and Controllers, as well as
any staged software and firmware packages.
2
Compare the version numbers of the drive firmware displayed in Installed
Software and Firmware with the version numbers of the drive firmware
displayed in Staged Software and Firmware.
Configure and Connect to the Customer Management Network
Select this option.
Select this option.
Select this option only if the Patch Readme or Release Notes instructs you to
do so.
Select this option if there is a minor condition, such as a single failed hard
drive. For a more serious error, attempt to resolve the condition. If you are
unable to resolve the condition, contact Oracle Customer Support.
Select this option if there are system alerts for failed email, failed call-home,
or a failure to connect to an NTP server.
Select these two options if the software update fails but the system returns to
a Normal status with only a compatibility error. If a second attempt to
upgrade the software fails, contact Oracle Customer Support.
pillar
.
166

Advertisement

Table of Contents
loading

Table of Contents