Table of Contents
Advertisement
Legend
1 Slide rail
2 Mounting bracket release button
3 Mounting bracket
5
Slide the Controller back into the rack.
6
Simultaneously unlock both slide rail release buttons, and push the
Controller completely into the rack.
Figure 57: Slide rail release button
Legend
1 Slide rail release button
2 Slide rail
Note: The Controller should stop after approximately 15 inches (40 cm) of
travel.
7
Verify that the cables and the CMA retracted without binding.
8
Adjust the cable hangers and CMA as required.
Install Components into the Rack
89
Advertisement
Table of Contents
