7
Cable Drive Enclosure 3 to Drive Enclosure 5.
Related Links
Drive Enclosure Cabling
Build Map for Your Oracle FS System
Drive Enclosure Wiring Diagrams
Example of Two Strings
Example of Two Strings
The following figure shows an example wiring diagram with two strings of five
Drive Enclosures in an Oracle FS System. The system is a standard, factory
configuration with one SAS HBA per Controller. In a performance system, with
a) Connect the end of the cable labeled "DE-2 IOM0-2" to I/O module 0,
port 2 on Drive Enclosure 2.
b) Connect the other end of the cable, labeled "DE-5 IOM0-0," to I/O
module 0, port 0 on Drive Enclosure 5.
a) Connect the end of the cable labeled "DE-3 IOM1-2" to I/O module 1,
port 2 on Drive Enclosure 3.
b) Connect the other end of the cable, labeled "DE-5 IOM1-0," to I/O
module 1, port 0 on Drive Enclosure 5.
Connect the Internal Cables
148
Need help?
Do you have a question about the FS1-2 and is the answer not in the manual?
Questions and answers