Oracle FS System components are compatible with racks that are compliant to
the ANSI/EIA 310-D-1992. Use a four-post rack that can support the weight load
of all Oracle FS System components.
The not racked Oracle FS System is staged at an Oracle manufacturing site. A
temporary label is affixed to each component that indicates the component name
and sequence number. A similar label is applied on the outside of the shipping
carton for each component. Follow the labels on the shipping cartons to best
facilitate the assembly of the Oracle FS System.
Power cords, network cables, and SAS cables are shipped in an accessory box,
which is labeled as "Cables". The rack labels, the system serial number (SSN)
labels, and the Controller World Wide Node Name (WWnN) labels are packaged
in a bag and shipped inside the carton for Pilot-1.
Caution: A Drive Enclosure (DE2-24P) weighs up to 55 pounds (24.9 kilograms)
and a Drive Enclosure (DE2-24C) weighs up to 110 pounds (49.89 kilograms). For
safe handling, use two people to lift it.
Caution: A Controller weighs up to 41 pounds (18.59 kilograms). For safe
handling, use two people to lift it.
Tip: To verify that you have retrieved all the small parts before recycling the
packing material, check the packing materials.
Related Links
Unpacking Systems
Site Preparation Checklist (Not-racked Systems)
System Components
Planning for a System Installation
Installation Overview
Installation Overview
Installation of a not racked Oracle FS System is the customer's responsibility
unless installation services are purchased from Oracle or a servicing partner.
Oracle recommends that the components in the rack follow the recommended
rack placement and cabling guidelines to the maximum extent possible. Use the
labels on the shipping cartons as a guideline for planning the installation.
Note: Several factors must be considered prior to the installation of not racked
Oracle FS Systems.
Available rack space
•
Excessive heat from the non-Oracle FS System components might impact
•
the Oracle FS System components
Cooling requirements for non-Oracle FS System components might not be
•
compatible with Oracle FS System components
Oracle FS Systems: Installation Overview
16
Need help?
Do you have a question about the FS1-2 and is the answer not in the manual?
Questions and answers