Pilot Led Indicators; Table 47: Drive Enclosure Led Status And Description (Drives) - Oracle FS1-2 Installation Manual

Legend
1 Power and activity indicator
The following table provides status information on the drive LEDs.

Table 47: Drive Enclosure LED status and description (drives)

Status
Drive is installed
and operational.
The drive is located. On
A drive fault is
present.
A failure occurred
in the power control
circuit.
A failure occurred
in the disk array.

Pilot LED Indicators

The Pilot LEDs are on the front panel of the Pilot. Use these diagnostic LEDs to
determine if a component has failed in the Pilot.
The following figure shows the LEDs at the front of the Pilot:
Power/Activity Indicator
(green)
On and blinking with startup
or activity
On
Off
On
Oracle FS System LED Status
2 Drive fault indicator
Drive Fault indicator
(amber)
Off
Flash one second on and one
second off
On
In addition to the continuous
amber light on the Drive Fault
LED, the Locate LED on the
operator panel is also a
continuous amber light.
On
In addition to the continuous
amber light on the Drive Fault
LED, the Module Fault LED on
the operator panel is also a
continuous amber light.
Flash three seconds on and one
second off.
In addition to the flashing
amber light on the Drive Fault
LED, the Locate LED on the
operator panel is also a
continuous amber light.
209