Wwnn And System Serial Number Labels; Attach The Wwnn And System Serial Number Labels; Figure 6: Wwnn Label; Figure 7: Ssn Label - Oracle FS1-2 Installation Manual

Flash storage system (not racked)
Hide thumbs Also See for FS1-2:
Table of Contents

Advertisement

Note: The above example shows eight DE2–24P Drive Enclosures (2 RU), four
DE2–24C Drive Enclosures (4 RU), and two Replication Engines.

WWnN and System Serial Number Labels

The system serial number (SSN) labels and the Controller World Wide Node
Number (WWnN) labels are on the Oracle FS System to facilitate system
identification.

Figure 6: WWnN label

Following is a representation of the SSN label that contains the system serial
number and the Oracle part number of the Oracle FS System.

Figure 7: SSN label

Attach the WWnN and System Serial Number Labels

Carefully follow these instructions to ensure that all system labels are attached at
the recommended locations on the Oracle FS System components.
Important: Ensure that the bag containing the labels is not misplaced. Otherwise,
errors might result in the accurate identification of the Oracle FS System.
The rack labels, the system serial number (SSN) labels, and the Controller World
Wide Node Number (WWnN) labels are packaged and shipped in a bag inside
the carton for Pilot-1. Attach these labels at the recommended locations on the
Oracle FS System to facilitate system identification.
1
Attach one SSN label to the top left at the back of the rack.
Prepare for System Installation
41

Advertisement

Table of Contents
loading

Table of Contents