Table of Contents
Advertisement
11. DISPLAY AND OPERATION
SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from the utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item
Language, opening screen time, screen save time, screen save backlight, battery alarm display and invert colors
Display
Adjusting brightness and contrast
Buzzer volume, window move buzzer volume, key sensitivity, key reaction speed, touch detection mode
Security setting
Utility call key
Operation
Touch panel calibration
USB mouse/keyboard setting
VNC
Transparent mode
Ch No.
Setting the storage locations for backup data and backup settings, and setting the maximum number of backup
data
Backup/restoration
Setting the CPU No. setting at backup to "YES" or "NO"
Trigger backup settings
Setting the GOT operation when a device with the same IP address as that of the GOT is added to the network
Behavior of duplicate IPs
afterwards.
License management
license registration/deregistration
11.1 Display Setting
11.1.1
Function of Display
Setting regarding display is possible.
The items which can be set are shown below. When each item part is touched, the respective setting becomes possible.
Item
*1
Language
Opening screen time
Screen save time
Screen save backlight
Battery alarm display
Brightness, contrast
Invert colors
(only GT1450-Q)
*1
Only selectable languages are displayed.
The selectable languages differ depending on the fonts installed in the GOT.
For details of the fonts, refer to the following manual.
*2
Setting 0 does not hide the title screen.
The title screen is always displayed for 4 seconds or longer (which changes depending on the project data contents).
®
server function setting
Confirmation of the current language and switching language
can be performed regarding with the language displayed by
utility and dialog box.
The title display period at the main unit boot can be set.
The period from the user stops the touch panel operation till
the screen save function starts can be set.
Whether turning ON or OFF the backlight simultaneously at
the start of the screen save function can be specified.
Whether to display system alarm when the voltage of the GOT
internal battery has dropped can be specified.
The brightness can be adjusted.
■
Brightness, contrast
For the user-created screen and the utility screen, whether to
invert the displayed colors can be specified.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
Description
Description
11.1 Display Setting
Reference
11-1
11-5
11-6
11-9
11-11
11-13
11-15
11-17
11-18
11-19
11-20
11-21
11-22
11-25
Setting range
(Japanese)
(English)
(Chinese (Simplified))
(Chinese (Traditional))
(Korean)
(German)
(At factory shipment: User's selection)
*2
0 to 60 seconds
(At factory shipment: 5 seconds)
0 to 60 minutes
(At factory shipment: 5 seconds)
ON/OFF
(At factory shipment: OFF)
ON/OFF
(At factory shipment: OFF)
-
ON/OFF
(At factory shipment: OFF)
11 - 1
9
10
11
12
13
14
15
16
Advertisement
Table of Contents
