Memory check operation
Carries out write/read check of memory.
The following example explains about Memory Check using built-in flash memory (C drive).
For the Built-in CF card (A drive) memory check or Extended memory card (B drive) memory check, install
the CF card before carrying out the same key operations as built-in flash memory. For the USB drive (E
drive) memory check, install the USB memory before carrying out the check operations.
Select [Flash Memory] in the Memory check setting
Touch to input password (
built-in flash memory, which is completed in around 10
12.1 Diagnostic Functions
12.1.3 Memory check
When drive is not displayed
When the drive (memory) to check is not displayed, confirm the mounting procedure
or memory type with reference to the following.
11.3.7 USB device status display
When no faults are found in mounting, etc, a memory failure may be arosen.
Replace the CF card or USB memory or built-in flash memory (C drive).
For details of built-in flash memory, contact your local Mitsubishi (Electric System)
button, the numeric keyboard window is
button, returns to the initial menu.
) and touch
5 9 2 0
key,executes read/write check for the