Table of Contents
Advertisement
Static translation is factory-enabled on all Secure Routers, and dynamic translation is factory-
disabled. Type no enable static or no enable dynamic to disable a previously enabled form of
translation.
parameter
static
dynamic
syntax:
[ no ] enable < static | dynamic >
example:
SR/configure/interface/ethernet 0/nat> enable dynamic
applies to:
All modules
configure interface ethernet nat ip
This command changes the factory default IP address used for dynamic port translation.
The default is the Ethernet port IP address.
parameter
old_ip_address
new_ip_address
syntax:
ip old_ip_address < IP address > new_ip_address < IP address >
example:
SR/configure/interface/ethernet 0/nat> ip 140.141.99.29
applies to:
All modules
Avaya Secure Router 3120 Command Reference Guide
Static address and port translation
Dynamic port translation
Old translation IP address
New global IP address to which the LAN port's current IP address
will be translated.
configure interface ethernet nat ip
definition
definition
December 2010
339
Advertisement
Table of Contents
