Configure Interface Bundle Link Serial - Avaya Secure Router 3120 Command Reference Manual

[ no ] link e1 <slot/port > [ : < n > ] [ speed < 56 | 64 > ] [ inverted_data]
example 1:
SR/configure/interface/bundle Tokyo_6> link e1 1/1
This example assigns E1 WAN link 1 to a bundle.
example 2:
SR/configure/interface/bundle Tokyo_6> link e1 2/1-4 inverted data
This example assigns E1 links 1 through 4 to a multilink bundle, with data inversion to occur
on all channels. The transmission speed on all channels will be 64 kbps.
example 3:
SR/configure/interface/bundle Tokyo_6> link e1 1:1-6,10-15 speed 56
This example assigns DSO channels 1 to 6 and 10 to 15 of E1 link 1 to a fractional E1 bundle. All
DSO channels on this bundle will operate at 56 kbps without data inversion.
applies to:
T1/E1 module, serial modules that support v.35 or x.21

configure interface bundle link serial

This command assigns one or more serial links to a WAN bundle.
parameter
serial
link_spec
syntax:
serial link_spec
example:
SR/configure/interface/bundle paultest> link serial 2/3
applies to:
Serial modules that support v.35 or x.21
Avaya Secure Router 3120 Command Reference Guide
Serial link to be assigned
Specifies the serial module's slot and port to be configured.
configure interface bundle link serial
definition
December 2010 255