TEST
test e1 loopback inward1_analog
test e1 loopback inward2
test e1 loopback payload
applies to:
All modules
test e1 loopback payload
This command activates a local E1 payload loopback.
The loopback sends the incoming E1 back to the remote system. The payload loopback
corrects bipolar violations, CRC errors, and frame bit errors before returning the signal.
syntax:
[ no ] loopback payload
example:
SR/test/e1 1/3> loopback payload
To verify loopback status during the test, use the show module test e1 command.
test e1 loopback inward1
test e1 loopback inward1_analog
test e1 loopback inward2
test e1 loopback line
applies to:
All modules
test t1
This command accesses next-level commands for conducting tests on a T1 interface.
922
Avaya Secure Router 3120 Command Reference Guide
related commands:
related commands:
December 2010