Ip Pim Cbsr Holdtime - Avaya Secure Router 3120 Command Reference Manual

parameter
name
dlci
example:
The following command sets Ethernet1 as the CBSR interface.
SR/configure/ip/pim/cbsr> interface ethernet 1/1
applies to:
All modules

ip pim cbsr holdtime

Sets the CBSR holdtime (default: 130). Use the no form of this command to set the default
value.
syntax:
[no] holdtime time
parameter
time
example:
The following example sets the holdtime to 33 seconds.
SR/configure/ip/pim/cbsr> holdtime 33 SR/configure/ip/pim/cbsr>
applies to:
All modules
ip pim cbsr period
set the interval between originating bootstrap messages. (default:60). Use the no form of this
command to set the default value.
syntax:
Avaya Secure Router 3120 Command Reference Guide
The name of the interface (ethernet0, ethernet1 or bundle
name)
The data link connection identifier of the PV. Valid range is: 16
—1022.
The BSR hold time. Valid range is: 1—65535.
definition
definition
ip pim cbsr holdtime
December 2010 771