Configure Interface Bundle Qos Delete_Class - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
All modules
Note:
This command deletes all classes for a specific bundle, both inbound and outbound.

configure interface bundle qos delete_class

This command deletes a QoS class configured on the specified bundle.
Only a leaf class (a class that has no children) can be deleted.
parameter
class_name
syntax:
delete_class class_name < name >
example:
SR/configure/interface/bundle SF_01/qos> delete_class eng3
applies to:
All modules
configure interface bundle qos enable
This command enables class-based queuing on a specified interface. CBQ must be enabled
for QoS classes to function.
CBQ bandwidths (CR and BR) can be configured as a percentage of the interface bandwidth,
from 1 – 100%.
CR and BR Kbps for all classes on a bundle for a given direction should be expressed either
as a percentage or in Kbps. Do not mix percentage and Kbps.
Policing rate can also be configured as a percentage of the interface bandwidth, however
policing rates for classes on a bundle can be configured as a mix of Kbps and percentage.
The save local command will save bandwidths (CR, BR, policing rate) in the same way as they
were configured.
If bandwidths are configured as a percentage, when the bandwidth of a multi-link bundle is
modified by adding or removing links, the bandwidths will automatically be updated based on
314 Avaya Secure Router 3120 Command Reference Guide
Name of QoS class to be deleted from a specified bundle.
definition
December 2010