Callednum - Avaya Secure Router 3120 Command Reference Manual

parameter
caller-number
example:
To configure the bundle "wan1" with caller ID "1234567", execute the following command:
SR/configure/interface bundle wan1/isdn/ caller 1234567
Note:
Multiple caller configurations are planned for a future release.
:
T1, E1 module

callednum

Configures the number to be dialed. This number will be used to call, whenever interesting
data will flow through the BRI bundle. "no" form of this command will remove the configured
called number.
syntax:
callednum <called-numbe> [sub-address] <cr>
parameter
callednum
sub-address
example:
To configure the bundle "wan1" with called number "1234567", execute the following
command:
SR/configure/interface bundle wan1/isdn/ callednum 1234567
applies to:
T1, E1 module
Avaya Secure Router 3120 Command Reference Guide
The caller number. The number is limited to a maxiumum
of 20 digits.
The number to be dialed. The number (entered as a word)
is limited to a maximum of 10 digits.
A number limited to a maximum of 10 digits.
definition
definition
December 2010
callednum
739