Configure Interface Avc Seg_Threshold - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
SR/configure/interface/avc wan08 22/red> wq_bias_factor 6
configure interface avc red tx_min_thresh
configure interface avc red tx_max_thresh
applies to:
All modules

configure interface avc seg_threshold

This command sets the segmentation threshold for an AVC.
Remember that the segmentation threshold can never be greater than the frame size.
parameter
bytes
syntax:
seg_threshold seg_threshold bytes < n >
example:
SR/configure/interface/avc wan08 22> seg_threshold 56
configure interface avc bridge
configure interface avc class
configure interface avc cvc
configure interface avc diff_delay
configure interface avc enable
configure interface avc fragment_size
configure interface avc ip
configure interface avc map
configure interface avc red
200 Avaya Secure Router 3120 Command Reference Guide
related commands:
All packet fragments will be equal to or greater than
seg_threshold. Packets less than 2 x seg_threshold will be
forwarded rather than fragmented.
The range is 56 - 4096; the default is 512.
related commands:
definition
December 2010