Configure Interface Bundle Fr Pvc Map - Avaya Secure Router 3120 Command Reference Manual

[ no ] ip source_forwarding primary < IP address > [ secondary < IP address > ]
example:
SR/configure/interface/bundle SF_01/fr/pvc 19> ip source_forwarding 192.5.72.1
applies to:
All modules

configure interface bundle fr pvc map

This command assigns a static peer IP address to a PVC.
Once a static peer IP address has been assigned, inverse ARP ceases to function. If a remote
IP address is changed, the static entry will not update.
Use the no option of this command to remove the static entry and automatically invoke inverse
arp.
parameter
ipaddr
syntax:
[ no ] map ipaddr < IP address >
example:
SR/configure/interface/bundle SF_01/fr/pvc 19> map 10.1.100.20
applies to:
All modules
configure interface bundle fr pvc nat
This command accesses next-level commands for enabling network address translation (NAT)
on a frame relay PVC.
Before using this command, be sure to give the PVC an IP address, using the configure
interface bundle fr pvc ip address command.
syntax:
nat
Avaya Secure Router 3120 Command Reference Guide
Remote IP address of the PVC
configure interface bundle fr pvc map
definition
December 2010 227