Configure Interface Bundle Nat Trans_Addr - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE

configure interface bundle nat trans_addr

This command adds or deletes the NAT translation port IP address for a specific bundle.
parameter
IP address
syntax:
[ no ] trans_addr < IP address >
example:
SR/configure/interface/bundle SF_01/nat> trans_addr 101.2.4.9
configure interface bundle nat address
configure interface bundle nat enable
configure interface bundle nat ip
configure interface bundle nat max_entries
configure interface bundle nat pass_thru
configure interface bundle nat max_ports
configure interface bundle nat port
configure interface bundle nat reverse
configure interface bundle nat timeout
configure interface bundle nat trans_mode
configure interface bundle nat unregistered
applies to:
All modules
290 Avaya Secure Router 3120 Command Reference Guide
Dynamic port translation
Enter an IP address.
The range is 1 - 10; the default is 1.
related commands:
definition
December 2010