Ip Pim Interface Hello-Interval - Avaya Secure Router 3120 Command Reference Manual

applies to:
All modules

ip pim interface hello-interval

Sets the frequency with which the hello messages are to be sent (default: 30 seconds). Use
the no form of this command to set the default value.
syntax:
[no] hello-interval time
parameter
time
example:
To set the holdtime to 90 seconds, enter:
SR/configure/ip/pim/interface ethernet 1/1> hello-interval 90 SR/configure/ip/pim/interface
ethernet 1/1>
applies to:
All modules
ip pim interface hello-priority
Sets the priority used to determine the Designated Forwarder (default: 1). Use the no form of
this command to set the default value.
syntax:
[no] hello-priority priority
parameter
priority
example:
To set the hello priority, enter:
SR/configure/ip/pim/interface ethernet 1/1> hello-priority 12 SR/configure/ip/pim/interface
ethernet 1/1>
Avaya Secure Router 3120 Command Reference Guide
The hello interval in seconds. Valid range is: 0— 65535.
The hello priority. Valid range is: 1—4294967295
ip pim interface hello-interval
definition
definition
December 2010 779