All modules
configure interface bundle ip access-group
This command applies a packet filtering rule set to a specific bundle.
You must first use the configure ip access-list commands to create the rule set.
parameter
name
direction of packet
transmission
in
out
syntax:
ip access-group < name > < in | out >
example:
SR/configure/interface/bundle SF_01> ip access-group Rules_01 out
configure interface bundle ip address
configure interface bundle ip directed_broadcast
configure interface bundle ip multicast
configure interface bundle ip source_forwarding
configure interface bundle ip unnumbered
applies to:
All modules
configure interface bundle ip address
This command assigns an IP address and subnet mask to a bundle.
Avaya Secure Router 3120 Command Reference Guide
Name of the filtering rule set to be applied.
Packets that are inbound.
Packets that are outbound.
related commands:
configure interface bundle ip access-group
definition
December 2010
247