MULTICAST COMMANDS
state. Use the no form to remove the configured value and return this command to its default
value (180 seconds).
syntax:
[no] ip pim assert-holdtime time
parameter
time
example:
The following example configures a global assert-holdtime value of 600.
SR/configure/ip/pim> assert-holdtime 600
applies to:
All modules
ip pim cbsr
Configures the PIM router as a candidate BSR (CBSR). This is a mode command and will take
you to the BSR mode.
syntax:
cbsr
example: The following example enters the BSR mode.
SR/configure/ip/pim> cbsr SR/configure/ip/pim/cbsr>
applies to:
All modules
ip pim cbsr interface
Sets the CBSR interface. Use the no form of this command to remove the configured bsr
interface.
syntax:
[no] interface name [ dlci ]
770
Avaya Secure Router 3120 Command Reference Guide
The hold time in seconds. Valid Range is: 1—65535 seconds.
definition
December 2010