Chapter 24: Firewall Commands - Avaya Secure Router 3120 Command Reference Manual

Chapter 24: FIREWALL COMMANDS

Use the firewall commands to configure protection and management services for the Router. The firewall
commands allow you to:
• Create filters for FTP, HTTP, SMTP, RPC and other traffic
• Protect the network against intrusion attempts including the broad spectrum of Denial of Service
attacks such as SYN attacks, Win-nuke attacks, and IP sequence number spoofing
• Manage traffic by creating policies to control connections, bandwidth and the like.
The limits on the number of VPN connections through the firewall are:
• Static VPN connections—5,000
• Dynamic VPN Connections—30,000
• Static Web Alg Connections—10,000
• Static FTP Cntrl Connections—1,000
• Static FTP data Connections—10,000
• Static VPN Selectors—30,000
firewall
Enters the configure mode for all firewall global and firewall map-related commands.
syntax:
firewall map-name
parameter
map-name
example:
To configure firewall global commands, enter:
SR/configure> firewall global SR/configure/firewall global>
To configure corporate firewall map-related commands, enter:
SR/configure> firewall corp SR/configure/firewall corp>
Avaya Secure Router 3120 Command Reference Guide
A label for map-name mode commands.
definition
December 2010 941