Ip Pim Crp Holdtime - Avaya Secure Router 3120 Command Reference Manual

MULTICAST COMMANDS
parameter
address
mask
priority
example:
To set the group IP address for CRP advertisements to 224.1.1.0, enter:
SR/configure/ip/pim/crp> group-add 224.1.1.0
applies to:
All modules

ip pim crp holdtime

Set the holdtime advertised in the CRP messages (default: 150 seconds). Use the no form of
this command to set the default value.
syntax:
[no] holdtime time
parameter
time
example:
To set the holdtime to 200 seconds, enter:
SR/configure/ip/pim/crp> holdtime 200
applies to:
All modules
774 Avaya Secure Router 3120 Command Reference Guide
The group IP address used for Candidate RP advertisement.
The subnet mask of the group that is used for the CRP
advertisement.
The priority of the group address used for Candidate RP
advertisement. The default is the priority of the CRP. Valid
Range is: 0—255.
The CRP holdtime in seconds. Valid range is: 1—65535
definition
definition
December 2010