Table of Contents
Advertisement
CONFIGURE
configure reverse_telnet set_baud_rate
configure reverse_telnet set_data_bits
configure reverse_telnet set_flow_control
configure reverse_telnet set_parity
configure reverse_telnet set_stop_bits
configure reverse_telnet telnet_port
configure reverse_telnet telnet_timeout
applies to:
All modules
configure reverse_telnet set_baud_rate
This command sets the baud rate for the second serial port.
parameter
baud_rate
syntax:
set_baud_rate baud_rate < n >
example:
SR/configure/reverse_telnet> set_baud_rate 65
configure reverse_telnet enable
configure reverse_telnet set_data_bits
configure reverse_telnet set_flow_control
configure reverse_telnet set_parity
configure reverse_telnet set_stop_bits
configure reverse_telnet telnet_port
configure reverse_telnet telnet_timeout
applies to:
488
Avaya Secure Router 3120 Command Reference Guide
related commands:
The range is 50 - 115200; the default is 9600.
related commands:
definition
December 2010
Advertisement
Table of Contents
