CONFIGURE
All modules
configure ipmux autoconf
This command enables or disables IP mux auto-configuration on a Secure Router.
syntax:
autoconf
example:
SR/configure> autoconf
applies to:
All modules
configure ipmux route
This command adds a destination IP address and subnet as well as the gateway IP address
to the Router table.
parameter
ipaddress
netmask
gwipaddr
pvc
syntax:
ipmux route ipaddress < IP address > netmask < subnet mask > gwipaddr < gateway IP
address > [ pvc ]
SR/configure> ipmux route 10.2.100.16 255.0.0.0 10.2.100.30
applies to:
All modules
400
Avaya Secure Router 3120 Command Reference Guide
IP address of the route's destination
Destination's subnet mask address
IP address of the gateway to the destination
PVC number for route using fr gateway name
The range is 16 - 1022; the default is 0.
definition
December 2010