Configure Interface Avc Bridge - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
configure interface avc ip
configure interface avc map
configure interface avc red
configure interface avc seg_threshold
configure interface avc sequence
configure interface avc vlan
applies to:
All modules

configure interface avc bridge

This command configures support for IEEE 802 tagged frames.
parameter
type
lan
vlan
syntax:
bridge < lan | vlan >
example:
SR/configure/interface/avc wan08 22> bridge lan
configure interface avc class
configure interface avc cvc
configure interface avc diff_delay
configure interface avc enable
configure interface avc fragment_size
configure interface avc ip
configure interface avc map
188 Avaya Secure Router 3120 Command Reference Guide
next-level commands
LAN packets (IEEE 802.3) to be bridged
This is the default value.
VLAN packets (IEEE 802.IQ) to be bridged
related commands:
definition
December 2010