Show Module Alarms Ct3 - Avaya Secure Router 3120 Command Reference Manual

example:
SR/show/module/alarms> t3 1/1
In alarm displays, Off = No Alarm, On = Alarm in Progress.
applies to:
Clear Channel T3 module

show module alarms ct3

This command displays alarms detected on a Channelized T3 interface. It also shows the
active user threshold alarms individually for all user statistics configured with alarm thresholds.
To see the alarms in real-time, specify the desired refresh interval in minutes when entering
this command. To return to the system command prompt, type q.
parameter
ct3
ct3_identifier
t1
refresh_interval
The following command shows alarms at the T3 level:
syntax:
ct3_identifier [ refresh_interval < n > ]
example:
SR/show/module/alarms> ct3 1/1
The following command shows alarms at the T1 level:
syntax:
ct3_identifier:t1 [ refresh_interval < n > ]
example:
SR/show/module/alarms> ct3 1/1:5
In alarm displays, Off = No Alarm, On = Alarm in Progress.
applies to:
Avaya Secure Router 3120 Command Reference Guide
Channelized T3 (1 or 2, depending upon the system)
The slot in which the module is located.
T1 Channel
How often, in minutes, the alarm display will be updated
(optional entry; minimum is 1 minute).
show module alarms ct3
definition
December 2010 861