Table of Contents
Advertisement
parameter
hiprio
syntax:
interface bundle fr interleave> [no] enable interface bundle fr interleave> hiprio crpcnt <value>
brpcnt <value>
example:
SR/configure/interface/bundle MLPPP-A/fr/interleave> [no] enable SR/configure/interface/
bundle MLPPP-A/fr/interleave> hiprio crpcnt 100 brpcnt 55
configure interface bundle fr intf_type
This command sets the interface type for a frame relay bundle.
parameter
type
dce
dte
nni
syntax:
intf_type type < dce | dte | nni >
example:
SR/configure/interface/bundle SF_01/fr> intf_type dce
applies to:
All modules
Avaya Secure Router 3120 Command Reference Guide
Reserves committed and excess bandwidth for high priority
packets.
The command has the following parameters:
• crpcnt - The committed rate shown as percent (range
1-100)
• brprcnt - The burst rate shown as percent (range 1-100)
Data communications equipment (DCE)
Data terminal equipment (DTE) (default)
Switched network-to-network interface (NNI)
configure interface bundle fr intf_type
definition
definition
December 2010
215
Advertisement
Table of Contents
