PPPOE
parameter
number
example:
Example
SR/configure/interface/ virtual-access <name>> pppoe ethernet 1
show interface virtual-access
applies to:
T1, E1 module
protocol pppoe
This command specifies the tunneling protocol, with an optional parameter client.
syntax:
protocol pppoe <client>
parameter
client
example:
SR/configure/interface/ virtual-access <name>> protocol pppoe
show interface virtual-access
applies to:
T1, E1 module
802
Avaya Secure Router 3120 Command Reference Guide
The number of the Ethernet interface.
next-level commands
Specifies the client (optional).
next-level commands
definition
definition
December 2010