Configure Interface Ethernet Qos Class Add_Dscp - Avaya Secure Router 3120 Command Reference Manual

Note:
The CLI may display the command: configure interface ethernet qos class nat_ip. This is an
error. This command is not supported.

configure interface ethernet qos class add_dscp

This command adds diffserv code points to this class.
Assured forwarding code points can be specified by using keywords "af11 - af43." The
expedited forwarding code point can be specified as "ef." Class selector code points can be
specified using "cs0 - cs7."
parameter
ds_codepoint
syntax:
add_dscp ds_codepoint < n >
example:
SR/configure/interface/ethernet 0/qos/class v1100> add_dscp 11
configure interface ethernet qos class add_dst_ip
configure interface ethernet qos class add_port
configure interface ethernet qos class add_src_ip
configure interface ethernet qos class add_vlan_id
configure interface ethernet qos class delete_dscp
configure interface ethernet qos class delete_ip_address
configure interface ethernet qos class delete_port
configure interface ethernet qos class delete_vlan_id
configure interface ethernet qos class mark_dscp
configure interface ethernet qos class mark_vlan
applies to:
All modules
Avaya Secure Router 3120 Command Reference Guide
Diffserv code point or a range
The range is 0 - 63.
related commands:
configure interface ethernet qos class add_dscp
definition
December 2010 347