Spid1 - Avaya Secure Router 3120 Command Reference Manual

ISDN
parameter
isdn
example:
To configure the ISDN related parameters for bundle "wan1", following command have to be
executed to enter the ISDN sub-tree. Under ISDN sub-tree, related parameters can be
configured
SR/configure/interface bundle wan1/isdn
applies to:
T1, E1 module

spid1

Configures the ISDN service profile identifier for BRI channel 1. SPID is used for defining the
services subscribed by ISDN device. All the switch types don't support SPID. SPID is
configured for each B Channel. SPID is usually a telephone number with some optional
numbers. However, numbering schemes depends on service profile. "no" form of this
command will unconfigure the SPID for BRI Channel 1.
syntax:
spid1 <spid-number>
parameter
spid-number
example:
To configure the bundle "wan1" with SPID "1234567" with local directory number 4567, execute
the following command:
SR/configure/interface bundle wan1/isdn/ spid1 1234567
applies to:
T1, E1 module
spid2
Configures the ISDN service profile identifier for BRI channel 2. SPID is used for defining the
services subscribed by ISDN device. All the switch types don't support SPID. SPID is
736 Avaya Secure Router 3120 Command Reference Guide
configure isdn parameters
Specifies the service profile identifier (a word).
definition
definition
December 2010