Configure Interface Ethernet Dhcp Server_Address - Avaya Secure Router 3120 Command Reference Manual

DHCP
syntax:
configure interface ethernet < slot/port> dhcp gateway_address < gateway ip address >
example:
SR/configure/interface ethernet 1/0> dhcp gateway_address 100.4.3.2
This example configures the gateway IP address 100.4.3.2 for dhcp relayed packets on
Ethernet 0.

configure interface ethernet dhcp server_address

applies to:
All systems.
configure interface ethernet dhcp server_address
This command configures the dhcp server address to forward dhcp packets. It also enables/
disables the dhcp relay funtionality.
Use the no form of this command to remove the configured server address.
syntax:
configure interface ethernet <slot/port> dhcp server_address < server ip address >
example:
SR/configure/interface ethernet 1/0> dhcp server_address 120.5.4.3
This example configures the server IP address 120.5.4.3 for dhcp relayed packets on Ethernet
0.
configure interface ethernet dhcp gateway_address
applies to:
All systems.
682 Avaya Secure Router 3120 Command Reference Guide
related commands:
related commands:
December 2010