Table of Contents
Advertisement
CONFIGURE
ntp message type < none | emerg | alert | crit | err | warning | notice | info | debug >
example:
SR/configure/system/logging/syslog> ntp debug
applies to:
All modules
configure system logging syslog ppp
This command sets the PPP facility logging message priority.
The priorities are defined hierarchically by severity, with "emergency" messages being the most
urgent and "informational" messages being the least.
parameter
message type
none
emerg
alert
crit
err
warning
notice
infor
debug
syntax:
ppp message type < none | emerg | alert | crit | err | warning | notice | info | debug >
example:
SR/configure/system/logging/syslog> ppp warning
applies to:
550
Avaya Secure Router 3120 Command Reference Guide
Does not log any messages.
Emergency messages are logged.
Alert messages are logged, plus emergency messages.
Critical messages are logged, plus all messages described
above.
Error messages are logged, plus all messages described
above.
Warning messages are logged, plus all messages
described above. This is the default.
Notification messages are logged, plus all messages
described above.
Informational messages are logged, plus all messages
described above.
Debugging messages are logged, plus all messages
described above.
definition
December 2010
Advertisement
Table of Contents
